Rod Infill Temporary Pool Fencing with Star Picket Connections

Our temporary pool fence/fencing are deigned according to the Australian Standard A.S. 1926.1-2012 – Swimming Pool Safety.

Temporary pool fence are installed around the swimming pools or spas for some security purpose.

  • Enclose dangerous areas and prevent unauthorized access and protect workers' security in the swimming pool construction site.
  • Prevent kids or pets from accessing or falling off when filled with waters in the commercial or private swimming pool or spas.
  • Meet for pool safety regulations.
Hot dipped galvanised temporary pool fencing are surrounding the swimming pool.

TPFR-01: Temporary pool fencing are enclosed the swimming pool to protect kids and pets.

Several pieces of temporary pool fencings are surrounding the pool construction site.

TPFR-02: Temporary pool fencing are used to enclose dangerous area and protect workers' safe.

Detailed specifications

  • Material: tubular galvanized steel.
  • Surface treatment: hot dipped galvanised or powder coating.
  • Infill bar spacing: 70 mm or 65 mm.
  • Gaps from bottom frame to the ground: 100 mm Max.
  • Connection type: star pickets or steel clamp.
Star pickets are connecting two neighbour temporary pool fencing panels.

TPFR-03: Star picket connection.

Steel clamps are connecting two neighbour temporary pool fencing panels in construction sites.

TPFR-04: Steel clamp connection.

Popular Specifications of Rod Infill Temporary Pool Fencing
  Type 1 Type 2
Panel Height 1250 mm 1050 mm
Panel Length 2000 mm 2000 mm
Frame Diameter

25 mm square tube

32 mm O.D.

25 mm square tube

32 mm O.D.

Infill Bars

8 mm × 5 mm wire

7 mm steel rod

8 mm × 5 mm wire

7 mm steel rod

Infill Bar Spacing 70 mm or 65 mm 70 mm or 65 mm
Gap From Frame Bottom to Ground Max. 100 mm Max. 100 mm

System components

  • Temporary pool fencing panel
  • Steel flat feet
  • Star pickets
  • Self-closing temporary pool gate
Several temporary pool fencing are surrounding swimming pool.

TPFR-05: Temporary pool fencing panel

A piece of steel plate are supporting the star picket and fence panel.

TPFR-06: Steel flat feet

A black star pickets with yellow plastic cap are connecting temporary pool fencing.

TPFR-07: Star pickets

A self-closing temporary pool fencing gate are installed on the fence panel.

TPFR-08: Self-closing gate

Temporary pool fencing panels

This type temporary fencing panels are constructed of rod infills and square or round frame pipes, which is different from temporary fencing with steel pipe infills.

  • Comply with council pool fencing regulations and Australian standards.
  • Supply temporary protection and enclosure while waiting permanent fencing.
  • Excellent children and pet protection.
  • No more than 100 mm consist gap from bottom frame to the ground.
  • The surface treatment can be hot dipped galvanized or powder coating.
  • Steel plate supplies firm foundation even used as permanent fencing.
  • Bolt-down design can supply further stability for pool fencing system.
  • Star picket connection between fence panels increase its stability and durability.
  • Smooth surface without any no burrs and sharp edges for safe installation and use.

Steel flat feet

  • Flat design prevent trapping hazards.
  • Bolt-down design to withstand heavy wind and improve its stability.
  • Hot dipped galvanised finish for most durable and longest lifespan.

Star pickets

Star pickets are important accessory in temporary pool fencing. They connect two neighbour pool fencing panels and increase the stability and durability of temporary pool fencing.

The star pickets are available:

  • Heavy duty hot dipped galvanised.
  • Black tar.

Self-closing temporary pool gate

  • Secure the pool area until a permanent fence is built.
  • Latch opening gate allows for easy access.
  • Unique design to ensure the safety of small children and prevent children from climbing up.
  • Further heighten safety and security of the pool construction site.
Temporary pool fencing with self-closing gate are protecting swimming pools.

TPFR-09: Self-closing temporary pool fencing gate.

Detailed specifications

  • Material: galvanized steel tubular.
  • Panel size: 2100 mm (H) × 995 mm.
  • Frame: 25 mm square tube or 32 mm O.D.
  • Infils: 8 mm × 5 mm wire or 7 mm steel rod.
  • Infill rod height: 1345 mm.
  • Infill bar spacing: 60 mm, 70 mm, 100 mm (maximum).
  • Feet: metal or plastic.
  • Distance from bottom panel edge to the ground: max. 100 mm.

Tell us your request and get a free quote:

TO: sales@tempfencing.org

Top
Home E-mail WhatsApp