6' × 10' Temp Chain Link Fence – One Man Installation, No Maintenance

6' × 10' temporary chain link fence with a height of 6 ft and a width of 10 ft. Use high quality mild steel wire and galvanized tube as raw material, the infill mesh and frame pipe are tightly wrapped together by tension bars and tension bands. As a manufacture, there are three types of stable panel feet including square, oval and flat shapes for your optional. The finished temporary chain link fencing is strong enough and durable for all site-specific requirement, either uneven ground or sloping sites.

In addition, 6' × 10' temporary chain link fence with wire diameter of 10.5 gauge, 2-2/5" mesh opening, frame outside diameter of 1-1/2", plus the hot dipped galvanized surface treatment, its service life can be up to 10 years.

System components

Specifications

Panel Specification
Dimensions
(H × W)
6' × 10' (equal to 1.8 × 3.0 m).
Wire diameter 9 ga/2.9 mm, 10.5 ga/2.7 mm, 11 ga/2.3 mm, 11.5 ga/2.4 mm, 12 ga/2.0 mm optional.
Mesh opening 2" (50 × 50 mm), 2.25" (57 × 57 mm), 2.4" (60 × 60 mm), 2.75" (70 × 70 mm) optional.
Frame O.D. 1.25"/32 mm, 1.5"/38 mm, 1.6"/40 mm round optional.
Brace Cross, vertical, horizontal brace with 1"/2.54 mm round or the same with frame O.D.
Frame structure 360° full welded tubular frame.
Surface treatment

Hot dipped galvanized.

Pre-galvanized.

Attached way

Mesh wrapped around the flat bar then connect with clamps.

Galvanized wire wrapped with steel frame in a rather tension way.

Fence feet Specification
Material Steel plate, steel solid rod, steel pipe.
Fence feet type Square, oval, flat
Square/Oval feet Specification
Dimensions
(H × W × H)

36" × 13.75" × 20" (915 × 350 × 200 mm)

30" × 18" × 20" (760 × 460 × 200 mm) optional.

Surface treatment

Hot dipped galvanized.

Pre-galvanized.

Flat feet Specification
Dimensions
(H × W × TH)

23.6" × 4.3" × 0.3" (600 × 110 × 8 mm)

35.4" × 3.0" × 0.25" (900 × 80 × 7 mm) optional.

Hole size O.D. 19 mm.
Interior round steel rod/pipe 30 mm O.D. × 150 mm H.
Exterior square steel rod/pipe 30 × 30 × 150 mm.
Rod space 30 mm.
Surface treatment

Hot dipped galvanized.

Pre-galvanized.

Clamp Specification
Clamp center distance 80, 90, 100 mm optional.
Applied post O.D. 25, 28, 32, 38, 40, 42 mm optional.
Clamp TH 4 mm.
Bolt Length available 100/60/40 mm with a 10 mm and 8 mm outer diameter.
Nut 15.9 mm, 17 mm optional.
Surface Treatment

Hot dipped galvanized.

Pre-galvanized.

Weight 0.42 kg/set.
Accessory List 2 pieces clamps with 1 bolt and 1 nut.

6' × 10' Temporary Chain Link Fence Panels

  • 360° full welded tubular frame. All pipes are 360° full welding circled to make sure a firm fence structure. This can ensure that the temporary fencing is not damaged during the frequent moving process, and will not be corroded even in hostile environment.
  • Hand craft techniques manufacture. Panels are filled with galvanized chain link mesh and wrapped around the frame tube with tension bars and tension bands by hand in a rather tension way.
  • Another option sturdy attached way. Available flat bar the use clamps to connect the two adjacent panels.
    A close up picture of temporary chain link fence with 360° full welding point.

    TCL-04: 360° full welded tubular frame

    A worker is tie the tension bands around the frame of the temporary chain link fence.

    TCL-05: Hand craft techniques manufacture

    A close up picture of temporary chain link fence with flat tension bar.

    TCL-06: Flat bar connect with panel frame

  • Strong corrosion surface treatment.
    • Hot dipped galvanized. To ensure at least 42 microns thickness of zinc coating. Service life can reach more than ten years.
    • Pre-galvanized. 28 microns or at least 14 microns thickness of zinc coating is anti- corrosion can satisfy the normal applications
    A close up picture of temporary chain link fence with hot dipped galvanized surface treatment.

    TCL-07: Hot-dip galvanized temp chain link fence

Fence feet

  • No need to dig holes or laying foundations. Only need to place the base on a flat surface. If necessary, there are two 19 mm diameter pin holes on the flat feet to peg the footing on the ground when the install completes. Besides, there are fixed sand bags for anchoring.
  • Adaptable to all site-specific requirement. With good regional adaptability, the ground is not required to be absolutely flat, neither cement or asphalt areas.
  • Stable enough. Technical staff will give a reliable advice of fencing feet size according to the panel dimensions.
  • Three different styles are available. We provide following three types of fence feet for your standard and special demand.
    A close up picture of square tubular fence feet for temporary chain link fence.

    TCL-08: Square tubular fence feet

    A close up picture of oval tubular fence feet for temporary chain link fence.

    TCL-09: Oval tubular fence feet

    A close up picture of flat fence feet for temporary chain link fence.

    TCL-10: Flat fence feet

Clamp

Another attached way designed for connecting chain link mesh panels and the frame tube together. Use high quality steel plate as raw material, specially moulded into various sizes to match with different size of fencing posts.

  • Versatile. Clamp center distance with 80, 90, 100 mm optional can match with fencing post diameter with 25, 28, 32, 38, 40, 42 mm.
  • Strong corrosion resistance. With hot dipped galvanized surface treatment, the clamps will not rust even in extremely severe weather.
  • Easy installation. Each set of clamp accessory list including 2 pieces clamps with 1 bolt and 1 nut. Just tighten the screws only by hand.
    A close up picture of galvanized clamp for temporary chain link fence.

    TCL-11: Galvanized clamp of temp chain link fence

    A close up picture of galvanized clamp installed to connect the two temporary chain link fence panels.

    TCL-12: Clamp installation

Production process

Specified Grade Of Steel – Pipe Cutting – Welded Temp Fence Panel Frame – Hot-Dipped Galvanized – Chain Link Mesh Woven – Tie the Mesh With Frame – Packing – Shipment

There are many steel pipes for temporary chain link fence as frame material

TCL-13: Steel pipe for temporary chain link fence

A close up picture of pipe cutting machine for temporary chain link fence manufacture.

TCL-14: Pipe cutting process

A worker is welding the frame of temporary chain link fence.

TCL-15: Manual welded temp fence panel frame

A close up picture of chain link fence mesh weaving machine.

TCL-16: Chain link mesh woven

There are a lot of temporary chain link fence with hot dipped galvanizing surface treatment

TCL-17: Hot-dip galvanized temp chain link fence

A worker is tie the tension bands around the frame of temporary chain link fence.

TCL-18: Tie the mesh with frame

There are a lot of packed galvanized temporary chain link fence.

TCL-19: Packed temporary chain link fence

The container was loaded into the packed temporary chain link fence.

TCL-20: Temporary chain link fence shipment

Packing details

Temporary chain link fencing panels are delivered in steel pallets, different loading quantity according to different goods and container sizes.

Packed in Steel Pallet
1 × 40' HC for 6'x10' 294 sets (1 panel + 1 fence feet + 1 set of clamp with bolt and nut + 1 sand bag).

Tell us your request and get a free quote:

TO: sales@tempfencing.org

Top
Home E-mail WhatsApp